Publicidad
Idiomas disponibles
Idiomas disponibles
[] Playback
Before
you begin:
Turnontheamplifierandanyotherdevice whichisconnected to thisunit,
Makesure the external audioreceiver (not included) a reset tothe correct
input mode,
1
Press [POWER] to turn on the unit,
2
Insert the disc with label side facing forward.
[] Disc Menu
Somediscs contain discmenuswhichdescribe the contents of the discor
allow you to customizediscplayback, or title menuwhich liststhe titles
availableon the DVD.
To display the DVD menu, press [MENU] and use
[Cursor A/V/_1
111_]to select an item, then press
[ENTER] (or [PLAY I_]).
To display the top menu, press [TOP MENU] and use
[Cursor A/V/_1
111_]to select an item, then press
[ENTER] (or [PLAY I_]).
Note:
• Menu operations may vary depending on the disc.
Refer to the manual accompanying the disc for more details.
[] Resume
Playback
• In case the DVD was recorded
on both sides, make
sure the label side you want to play back is
facing forward.
3
The unit switches to the DVD mode when the unit was
in TV mode and detects
the type of disc.
e.g.) DVD
I
I
• Press [PLAY I_] if the unit does not go to the DVD mode.
The disc starts playback.
• If playback does not start automatically,
press [PLAY I_]
again.
Press [STOP II] to stop playback
temporarily.
STOP
• If playback
remains stopped
for 20 minutes,
the unit
will turn itself off automatically
when "AUTO POWER
OFF" is set to "ON".
Press [EJECTIi]
to eject the disc.
Press [STOP II] during
playback.
Resume message will appear on
the TV screen.
Press [PLAY I_]. Playback will
resume from the point at which
playback
was stopped.
No te:
• Tocancel resume, p ress[STOPII] one more time in the stop
mode.On somediscs,[STOPII] will not work while the resume
messageappears.Pleasewait until the messagedisappears.
• The resume information will be kept even when unit is turned
off. However, ejecting the disc will cancel the resumefeature.
Playback will start at the beginning the next time you insert
the disc.
[] Skil
During
playback,
press [SKIP _
/ I_IH] repeatedly
to
skip chapters, titles or tracks to a desired
point.
Playback will start automatically
from the chapter, title
or track you selected.
No te:
• [SKIP_/llqH]
are not available when playback is stopped.
• Chapter/title/track search can only beperformed during
playback or when the unit has kept the resume information. It
cannot beperformed in the stop mode.
• Chapter/title search is not available with some DVD.
No re:
• "Q" may appear at the top-right on the TV
_% ]
screen when the operation is prohibited by
_)
[
the disc or this unit.
[
• Some DVD may start playback from title 2 or 3 due to specific
programs.
• During the playback of a 2-layered disc,pictures may stop for
a moment. This happens while the 1stlayer is being switched
to the 2nd layer. This is not a malfunction.
• When you cannot remove the disc, you may try either
following operations.
- Press and hold [EJECTA] on the unit for more than 5 seconds.
- Unplug the AC power cord and plug it in again, then press
[EJECTS].
It will take about 10 seconds to eject the disc, whRe that the
unit will not respond to any key commands.
[] Fast Forward
/ Fast Reverse
Press and hold [REV _1<] or [FWD IH_]
repeatedly
during
playback
to select the
desired forward
or reverse speed.
To continue
playback,
press [PLAY I1_].
No re:
• Set "STILL MODE" to "FIELD" in "OTHERS"men u if pictures in
the fast playback mode are blurred. (Refer to page 42.)
• Fastforward/fast
reversespeed varies with disc.
Approximate speed is I(2x), 2(8x), 3(20x), 4(50x) and 5( IOOx)
on DVD and 1(2x),2(8x) and 3(30x) on audio CD.
• For DVD,sound will be muted during the search.
• For audio CD,sound will be intermittent during the search.
EN
Publicidad
