•
Remove the filter insert and clean it as described
above.
•
Place the completely dry filter back into the ventilation
grille.
•
Put the ventilation grille back on the appliance. While
doing so, first press the lever to the left again. Let go
of it when the ventilation grille is completely fitted. It
needs to click in audibly.
Cleaning and storage
WARNING:
•
Before cleaning remove the mains lead from the
socket.
•
Under no circumstances should you immerse the
device in water for cleaning purposes. Otherwise
this might result in an electric shock or fire.
CAUTION:
•
Do not use a wire brush or any abrasive items.
•
Do not use any acidic or abrasive detergents.
Clean the housing with a soft, dry cloth without additives.
Storage
•
Let the iron cool down completely.
•
Wind the cable completely.
•
Please insert the hook of the floor nozzle into the
parking assistant on the rear of the device.
Troubleshooting
• The Device Does Not Work.
Remedy:
Check the connection to the mains.
Check the position of the switch.
• The device does not suck up anything.
Possible Cause:
The dust bag is full.
Remedy:
Renew the dust bag.
or
Possible Cause:
The filters are dirty.
Remedy:
Clean the components.
Possible Cause:
There is a foreign body in the suction tube or the
nozzle.
Remedy:
Check the accessories for foreign bodies.
26
Noise development
The sound pressure level in the ear of an operator (LpA)
was measured according to DIN EN ISO 3744.
Sound pressure level detected: 86.0 dB(A) (no limit)
Technical Data
Model: ................................................................... BS 1284
Power supply: .............................................230 V ~, 50 Hz
Power consumption:
P
: .................................................................1200 W
nom.
P
: .................................................................1400 W
max.
Dust filter bag: ....................................SSB 98 / Swirl Y 98
Protection class: ............................................................... II
Net weight: ............................................................. 3.45 kg
Subject to technical changes without prior notice!
This device has been tested according to all relevant cur-
rent CE guidelines, such as electromagnetic compatibility
and low voltage directives, and has been constructed in
accordance with the latest safety regulations
Disposal
Meaning of the "Dustbin" Symbol
Protect our environment: do not dispose of electrical
equipment in the domestic waste.
Please return any electrical equipment that you will no
longer use to the collection points provided for their
disposal.
This helps avoid the potential effects of incorrect disposal
on the environment and human health.
This will contribute to the recycling and other forms of
reutilisation of electrical and electronic equipment.
Information concerning where the equipment can be
disposed of can be obtained from your local authority.