Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATION
The FAN may be operated by the manual controls located on the FAN (as
shown in Fig 3) or by your remote control (shown in Fig 2) .
1. Place the FAN on a stable flat surface. Plug the cord set into a 220-240V~
electrical outlet.Plug on the FAN, existing room temperature will be
displayed at display panel.
2. POWER
FAN off by pressing the 'POWER' button again.
3. SPEED
medium, or high by pressing 'SPEED' . The speed setting is displayed on
the LED panel (shown in Fig 4).
4. MODE
NATURAL, and SLEEP mode .
- NORMAL Mode
( Fig 2)
: Turn the FAN on by pressing the 'POWER' button; Turn the
: You can adjust the fan speed to the desired level: low,
: Pressing the 'MODE' button will set the FAN into NORMAL,
: Fan will start work at any speed you set up.
5
( Fig 3)
Publicidad
