Descargar Imprimir esta página

HIKOKI RP 250YBL Instrucciones De Manejo página 6

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 38
English
5. Symbols
WARNING
The following show symbols used for the
device. Be sure that you understand their
meaning before use.
RP250YBL: Dust extractor
To reduce the risk of injury, user must
read instruction manual.
WARNING
WARNING! The dust extractor may
contain hazardous dust.
Dust class L (light). The dust extractors
are capable of picking up dust class L.
Follow your country's regulations relating
to dusts and to occupational health and
safety.
6. Standard Accessories
.
Suction hose (φ35 mm / 3.2 m)
Polyester filter cassettes (M class):
Attached to device
Fleece filter bag
Crevice nozzle
Universal nozzle
Handle adapter
Plastic suction tubes
Tube support
6
7. Specifications
.
Voltage
Frequency
Rated power
1
Air flow*
2
Air flow*
Negative pressure*
Negative pressure*
L  W  H
Weight without mains
3
cable*
Filter surface
*1 at the hose, *2 at the fan
*3 Weight: According to EPTA-Procedure 01/2014
Connection line on dust extractors with plug socket:
H05RR-F 3X 1.5
Note: Due to HiKOKI's continuing program of
research and development, the specifications
herein are subject to change without prior notice.
8. Initial Operation
Before plugging in the device, check that
the rated mains voltage and mains
1
frequency, as specified on the rating label,
match your power supply.
2
8.1
Fitting wheels (if necessary)
1
Insert the axles of the guide rollers in the holes
in the container until they engage.
1
Fit the large wheels as shown:
1
1
2
1
8.2
Inserting a Fleece Filter Bag
We recommend using paper and fleece filter bags
for:
- Applications, where small amounts of fine dust are
created (e.g. spot-grinding and grinding of paint
and lacquer coatings, extraction of drilling
applications with small diameters < 10 mm of
short duration, etc.).
- Use of devices, such as: routers, planers, small
grinding devices, etc.
Switch off the device, remove the mains plug and
open the snap locks (7). Remove the upper part (6)
from the container (8).
RP250YBL
V ~
220–240
Hz
50/60
W
1400
m³/h
151
m³/h
263
1
hPa
235
2
hPa
270
mm
457  400 535
kg
12.4
2
cm
8400

Publicidad

loading