Specific Safety Rules And Symbols - Metabo HPT DB 3DL2 Manual De Instrucciones

English
c) When battery pack is not in use, keep
it away from other metal objects like
paper clips, coins, keys, nails, screws,
or other small metal objects, that can
make a connection from one terminal to
another.
Shorting the battery terminals together may
cause burns or a fi re.
d) Under abusive conditions, liquid may
be ejected from the battery; avoid
contact. If contact accidentally occurs,
fl ush with water. If liquid contacts eyes,
additionally seek medical help.
Liquid ejected from the battery may cause
irritation or burns.
6) Service
a) Have your power tool serviced by a
qualifi ed repair
identical replacement parts.
This will ensure that the safety of the power
tool is maintained.
SPECIFIC SAFETY RULES AND
SYMBOLS
1. Use auxiliary handle(s), if supplied with the
tool.
Loss of control can cause personal injury.
2. Hold power tool by insulated gripping
surfaces, when performing an operation
where the cutting accessory may contact
hidden wiring.
Cutting accessory contacting a "live" wire may
make exposed metal parts of the power tool
"live" and could give the operator an electric
shock.
3. Hold power tools by insulated gripping
surfaces, when performing an operation
where the fastener may contact hidden
wiring.
Fasteners contacting a "live" wire may make
exposed metal parts of the power tool "live" and
could give the operator an electric shock.
4. Always wear ear protectors when using the
tool for extended periods.
Prolonged exposure to high
intensity
hearing loss.
5. Never place hands or other body parts near the
drill bit or chuck during operation. Hold the drill
by its handle only.
4
person using only
noise can cause
6. Because the cordless driver drill operates by
battery power, be aware of the fact that it can
begin to operate at any time.
7. When working at elevated locations, clear
the area of all other people and be aware of
conditions below you.
8. Never touch moving parts.
Never place your hands, fi ngers or other body
parts near the tool's moving parts.
9. Never operate without all guards in place.
Never operate this tool without all guards or
safety features in place and in proper working
order. If maintenance or servicing requires the
removal of a guard or safety feature, be sure
to replace the guard or safety feature before
resuming operation of the tool.
10. Use right tool.
Don't force small tool or attachment to do the
job of a heavy-duty tool.
Don't use tool for purpose not intended —for
example— don't use circular saw for cutting
tree limbs or logs.
11. Never use a power tool for applications
other than those specifi ed.
Never use a power tool for applications other
than those specifi ed in the instruction manual.
12. Handle tool correctly.
Operate the tool according to the instructions
provided herein. Do not drop or throw the tool.
Never allow the tool to be operated by children,
individuals unfamiliar with its operation or
unauthorized personnel.
13. Keep all screws, bolts and covers tightly in
place.
Keep all screws, bolts, and plates tightly
mounted. Check their condition periodically.
14. Do not use power tools if the plastic
housing or handle is cracked.
Cracks in the tool's housing or handle can lead
to electric shock. Such tools should not be used
until repaired.
15. Blades and accessories must be securely
mounted to the tool.
Prevent potential injuries to yourself or others.
Blades, cutting implements and accessories
which have been mounted to the tool should be
secure and tight.
16. Never use a tool which is defective or
operating abnormally.
If the tool appears to be operating unusually,
making strange
appears defective, stop using it immediately
and arrange for repairs by a metabo HPT
authorized service center.
noises, or otherwise