Lamborghini Caloreclima EM 6 N ST-E Manual Para La Instalacion Y El Mantenimento página 39

GAS CONNECTION
The system must be equipped with all the accessories required by current regulations.
We recommend the following:
always include a filter, do not apply mechanical strain to the components and, therefo-
re install a flexible joint as well as a pressure stabilizer and an interception cock at the
heating system inlet. The pipes must be laid using rigid pipes. Any flexible pipes must
be type approved.
Also bear in mind the necessary space required for carrying out maintenance opera-
tions on the burner and the boiler. After fitting the valve unit on the burner, check that
there are no gas leaks during the first ignition stage.
ADJUSTMENTS
COMBUSTION AIR ADJUSTMENT
Adjustment of combustion air is effected from
the outside of the cover. After loosening screw
A act on air adjustment screw B refer to the
label. Once adjustment has been completed
block screw A.
COMBUSTION HEAD ADJUSTMENT
Adjust the combustion head by acting on the screw C according to the indications
shown on the index.
Reference index
M
M
UK
39