Publicidad
Idiomas disponibles
Idiomas disponibles
RH basic
ENGLISH
Important Safeguards
When using electrical equipment, basic safety precautions
should always be followed to reduce the risk of fire, electric
shock and personal injury, including the following:
• Read all instructions before use.
• Remove the power cord from the unit and / or power source,
to disconnect the power, when servicing, cleaning, or for any
other reason.
• To reduce the risk of electric shock, do not immerse the
electrical equipment in water or liquids.
• See instructions for cleaning.
• Be sure the power cord supplied with your unit matches your
AC power requirements.
• Use only three-prong (earth grounded) power cords with this
unit.
• Do not operate after the equipment malfunctions or has
been damaged in any manner. Return the unit to our service
center for examination, repair, electrical or mechanical
adjustment.
• Only use the equipment for its intended purpose.
• To avoid electrical shock, do not open the housing. Refer to
qualified personnel only.
Warnings
• When handling hazardous chemicals, use appropriate hand
and eye protection.
• Weight of objects placed on the hotplate should not exceed
33lb. (15 kg).
• Do not use a vessel which is larger in diameter than the Hot
Plate surface. (5.5 inches, 140mm)
• Remember to use caution when heating and/or stirring small
diameter vessels, which could easily tip over.
• Do not use in the presence of flammable or combustible
chemicals.
• For tempering flammable liquids see page 5.
• The RH basic must not be used in areas with explosion haz-
ards.
• The instrument must be placed upon a fire-proof and/or non
flammable surface.
• Avoid contact with the hotplate, it may be hot!
Risk of burns!
The hotplate can reach temperatures in
excess of 450 °C.
Publicidad
