HOMCOM 820-308V00 Manual Del Usuario página 5

Instructions of use and assembly
1. Unpack the product and the accessories, remove all packaging. Check the
content for completeness or damage caused by transportation. Keep children away
from the packaging.
2. Only place on a rigid surface of non-flammable material that can bear the weight
of the product.
The appliance weighs approx.0.6~1.0kg depending on the different product
appearance (NOT including the fuel).
3. Only install in a location which is protected against cross-aeration/air draft.
4. Carefully read the warnings in the manual as well as the warning on the product if
any.
5. If something is broken or damaged, do not use the appliance and return the
appliance to the retail er immediately.
6. Follow the steps below to install this fire bowl.
(1). Place the burner pot in the fire bowl body carefully, make the burner pot
levelered (See Figure 1).
(2). Place the glass shield onto the fire bowl body (See Figure 2).
glass shield
fire bowl body
Safe way to (re-) fill the appliance
-Use a funnel for filling the appliance or use a dispenser bottle to fill the appliance.
-Do not fill the burner pot to a level above the "max" indicator (see Figure 3).
-If spillage occurs during the filling process, remove the spillage immediately and
always before lighting. Use an appropriate absorbent tissue.
-Never refill when light on.
-Before refilling the appliance after extinguishing the fire, make sure to wait for at
least 15 minutes to cool down completely.
Figure 3
Figure 1
Figure 2
max
Do not fill fuel into
the open flame
4
Do not fill fuel into
the hot burner