Publicidad
Idiomas disponibles
Idiomas disponibles
2.
CONTROL PANEL
3.
CHARGING THE INTERNAL BATTERY OF THE PORTABLE POWER
IMPORTANT: CHARGE IMMEDIATELY AFTER PURCHASE, AFTER EACH USE
AND EVERY 30 DAYS TO kEEP THE PORTABLE POWER INTERNAL BATTERY
FULLY CHARGED.
3.1
LED Indicators:
TO CHECk THE INTERNAL BATTERY'S CHARGE STATUS, PRESS THE
BATTERY STATUS BUTTON ON THE FRONT OF THE PORTABLE POWER
1.
The LED lights will indicate the charge level as follows:
•
A red LED indicates a 50% or less charge, and you should immediately
recharge the Portable Power.
•
A yellow LED indicates a 50 to 70% charge. The Portable Power may be used
but should be recharged as soon as possible.
•
A green LED indicates the internal battery is fully charged.
•
The CHARGING (red) LED indicates the Portable Power is charging
(connected to an AC power source). At full charge, the green LED will light.
3.2
Charging the Internal Battery using the Plug-In Charger:
1.
After removing the Portable Power from the carton, charge it for a minimum of 8
hours before using, even if the green LED glows.
NOTE: The ON/OFF switch should be in the OFF position to recharge the internal
battery.
2.
To charge, plug the included wall charger into the socket on the front of the
Portable Power.
3.
Plug the wall charger into a 120V electrical wall outlet.
4.
The CHARGING (red) LED will light indicating charging.
5.
The green LED will light when the battery has reached full charge. This could
take up to 72 hours due to the age and condition of the battery. The charger
will automatically go into maintain mode and maintain the battery at full charge
without damaging it.
6.
Charge the Portable Power as soon as possible after use.
2
•
•
Publicidad
