Facom CL3.C10SD Manual Original página 21

Labels on Charger and Battery Pack
Read instruction manual before
use
Battery charging
Battery charged
HOT/COLD pack delay
Problem pack or charger
Problem powerline
Do not probe with conductive objects
Do not charge damaged battery packs
Use only with facom battery packs. other
may burst causing personal injury and
damage.
2
Do not expose to water.
Have defective cords replaced immediately.
Charger only between 4°c and 40°c.
Discard the battery pack with due care for the
environment.
Do not incinerate the battery pack.
Charges li-ion battery packs.
See technical data for charging time.
Only for indoor use.
Description (Fig. 2)
WARNING: Never modify the power tool or any part of it. Damage or personal injury could result.
A. Trigger switch
B. Forward/reverse button
C. Battery release button
D. Battery pack
NU-CL3.C10JD CL3.C10RD CL3.C10SD_1015.indd 21
SAVE THESE INSTRUCTIONS FOR FUTURE USE
F
E
A
C
Do not probe with conductive objects
Do not charge damaged battery packs
Use only with facom battery packs. other
may burst causing personal injury and
damage.
Do not expose to water.
Have defective cords replaced immediately.
Charger only between 4°c and 40°c.
Discard the battery pack with due care for the
environment.
Do not incinerate the battery pack.
Charges li-ion battery packs.
See technical data for charging time.
Only for indoor use.
E. Worklight
F. Anvil
G. Main handle
21
B
G
D
2/29/2016 10:08:53 AM