Publicidad
Idiomas disponibles
Idiomas disponibles
z_CAUTION: Donotusethetrimmer forcutting stems g reater than itscapacity.
TR016, TR017 3 /8in.(5mm).
HT012, HT018 5 /8in.(8mm).
HT020, HT512, HT022 3 /4in.(19mm).
Use thetrimmer only forcutting n ormal shrubbery found a round h ouses and buildings.
4. LEVEL H EDGES (Figure 12)-To obtain e xceptionally
level h edges, apiece of
string canbestretched along thelength o fthehedge a saguide.
5. SIDE-TRIMMING
HEDGES (Figure 13)- Begin atthebottom and sweep u p.
Z_WARNING; TOGUARD A GAINST INJURY, OBSERVE THE FOLLOWING:
READ INSTRUCTION
MANUAL BEFORE USING, SAVE INSTRUCTION
MANUAL.
KEEP HANDS O NHANDLES.
DON'T O VERREACH.
DONOT USE UNDER W ET CONDITIONS.
DONOT USE WITH DAMAGED
EXTENSION
CORD.
• DONOT UNPLUG ORSTORE W ITH SWITCH L OCKED ON.
z_DANGER:
KEEP HANDS AWAY FROM BLADES.
Z_ CAUTION:
BLADE COASTS AFTER TURN OFF.
Problem
•Unit will not start.
Troubleshooting
Possible Cause
• Cord not plugged in.
• Circuit fuse is blown.
• Circuit breaker
is tripped.
• Cord or switch is
damaged.
Possible Solution
• Plug in cord.
• Replace circuit fuse.
• Reset circuit breaker.
• Have cord or switch
replaced at Black & Decker
Service Center or Authorized
Servicer.
For assistance with your product, visit our website www.blackanddecker.com
for the
location of the service center nearest you or call the BLACK & DECKER help line at
1-800-544-6986.
MAINTENANCE
The cutting blades are made from high quality, hardened steel and with normal usage,
they wilt not require resharpening. However, if you accidentally hit a wire fence, stones,
glass or other hard objects, you may put a nick in the blade. There is no need to remove
this nick as long as it does not interfere with the movement of the blade. If it does
interfere, unplug unit and while wearing proper eye protection use a fine toothed file or
sharpening stone to remove the nick.
If you drop the trimmer, carefully inspect it for damage. If the blade is bent, housing
cracked, or handles broken or if you see any other condition that may affect the
trimmer's operation, contact your local Black & Decker Service Center for repairs
before putting it back into use.
Fertilizers and other garden chemicals contain agents which greatly accelerate the
corrosion of metals. Do not store the toot on or adjacent to fertilizers or chemicals.
With the unit unplugged, use only mild soap and a damp cloth to clean the toot. Never
let any liquid get inside the toot; never immerse any part of the toot into a liquid.
Prevent the blades from rusting by applying a film of light machine oil after cleaning.
IMPORTANT: To assure product SAFETY and RELIABILITY, repairs, maintenance and
adjustment should be performed by authorized service centers or other qualified service
organizations, always using identical replacement parts.
Publicidad
