Black and Decker NST2118 Manual De Instrucciones

TRIMMER / EDGER
INSTRUCTION MANUAL
Model Number NST2118
Thank you for choosing Black & Decker! Go
to www.BlackandDecker.com/NewOwner
to register your new product.
PLEASE READ BEFORE RETURNING
THIS PRODUCT FOR ANY REASON:
If you have a question or experience a problem with your
Black & Decker purchase, go to
WWW.BLACKANDDECKER.COM/INSTANTANSWERS
for instant answers 24 hours a day.
If you canʼt find the answer or do not have access to the internet,
call 1-800-544-6986 from 8 a.m. to 5 p.m. EST Mon. - Fri
to speak with an agent.
Please have the catalog number available when you call.
SAVE THIS MANUAL FOR FUTURE REFERENCE.
VEA EL ESPAÑOL EN LA CONTRAPORTADA.
POUR LE FRANÇAIS, VOIR LA COUVERTURE ARRIÈRE.
INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y
PÓLIZA DE GARANTÍA. ADVERTENCIA: LÉASE ESTE
INSTRUCTIVO ANTES DE USAR EL PRODUCTO.
Model # NST2118
KEY INFORMATION YOU SHOULD KNOW:
• The guard must be installed before trimming or edging - if not, the
motor will overheat (page 7).
• When replacing the line, use only .065 inch diameter ROUND line
(B&D Model #AF-100 is recommended) - otherwise the tool will
not function properly (page 9).
• Do not bump the feed head against the ground - it will disrupt the
feed mechanism.
1