To Use; Setting The Temperature - Beurer HK 67 Instrucciones De Uso

Cinturón térmico portátil
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

4. Disconnect the Charging Cable; the LED will shut off. Charge the Power Bank at least once per year to
maintain its capacity.
WARNING
• While charging, do not cover the Power Bank. Only charge the Power Bank in a dry environment at
normal room temperature.
Charging other devices from the Power Bank
The Power Bank can also be used to charge other rechargeable
devices, such as smartphones. To charge your device using the
Power Bank, simply connect your device's USB cable to the Power
Bank and to the USB port on your device.

5. To Use

1. Connect the integrated Power Cable on the heating belt with the USB Power Socket on the Power Bank;
the Power Button will flash white three times, indicating the device is ready for use.
2. Place the heating belt around your waist and secure the ends together using the hook and loop fasteners.
CAUTION
• Ensure that the heating belt does not bunch up or fold over during use.
3. Press the Power Button on the heating belt to activate; the Power Button will illuminate in green
indicating the device is on Low. The power bank's LED illuminates or flashes white, according to the
charging level of the power bank.
4. To increase the heat level, press the Power Button again; the Power Button will illuminate yellow to
indicate the medium setting. Press a third time to increase to maximum heat; the Power Button will
illuminate red.
5. To shut off the heating belt, press the Power Button again. The LED on the heating belt will shut off
immediately, the LED on the power bank after a few seconds.
WARNING
• If the heating belt is being used over several hours, set the lowest temperature setting on the
Power Bank to avoid overheating the heated body part, which may lead to burns to the skin.
NOTICE: Protect the Power Bank from extreme cold to maintain its performance.
NOTE
• When the Power Bank level is too low, the heating belt will shut off. The Power Bank must then
be charged before using it again.

Setting the temperature

Setting 1: Minimum heat (LED display of the On/Off button lights up green)
Setting 2: Medium heat (LED display of the On/Off button lights up yellow)
Setting 3: Maximum heat (LED display of the On/Off button lights up red)
OFF: On/Off button not lit
5

Publicidad

Tabla de contenido
loading

Tabla de contenido