Publicidad
ESPAÑOL
Se recomienda que las reparaciones se efectúen por personal especializado.
Si detecta una incidencia con el producto o tiene alguna consulta, póngase en contacto con el
Servicio de Asistencia Técnica oficial de Cecotec a través del número de teléfono +34 96 321
07 28.
9. COPYRIGHT
Los derechos de propiedad intelectual sobre los textos de este manual pertenecen a CECOTEC
INNOVACIONES, S.L. Quedan reservados todos los derechos. El contenido de esta publicación no
podrá, ni en parte ni en su totalidad, reproducirse, almacenarse en un sistema de recuperación,
transmitirse o distribuirse por ningún medio (electrónico, mecánico, fotocopia, grabación o
similar) sin la previa autorización de CECOTEC INNOVACIONES, S.L.
30
THERMOSENSE 400 BLACK WOODY/WHITE WOODY
1. PARTS AND COMPONENTS
Fig. 1
1.
Spout
2.
Lid
3.
Base
Switch
4.
5.
Water-level indicator
6.
Handle
NOTE:
The graphics in this manual are schematic representations and may not exactly match the
product.
2. BEFORE USE
-
This appliance is packaged in a way as to protect it during transport. Take the appliance
out of its box and remove all packaging materials. You can keep the original box and other
packaging elements in a safe place. This will help you prevent product damage when
transporting it in the future. In case the original packaging is disposed of, make sure all
packaging materials are recycled accordingly.
-
Make sure all parts and components are included and in good conditions. If there is any
piece missing or in bad conditions, contact the official Cecotec Technical Support Service
immediately.
3. OPERATION
Before using the product for the first time, boil water twice without cleaning agents.
1.
Fill the kettle with water within the minimum and maximum level, without exceeding the
limit. Pay attention to the water-level indicator to keep water below the max. level.
2.
Place the kettle on the base.
3.
Make sure the voltage of the cord is compatible with the voltage of the mains and connect
the kettle to the mains socket.
Press the switch: the LED indicator will immediately light up, indicating that the device
4.
has started heating up.
5.
After boiling water, the machine switches off automatically.
ENGLISH
THERMOSENSE 400 BLACK WOODY/WHITE WOODY
31
Publicidad
