Lenco LBT-335 Manual De Usuario página 11

Locate the anti-skating weight
You will find a anti-skating weight with small fishing line from the package,
please follow below steps to locate the anti-skating weight:
1. Slip the looped end of the fishing line over the anti-skating weight
adjustment stub and into Groove 3
the factory-fitted cartridge).
2. Pull the anti-skating weight slightly to let the tie of the fishing line move
to the stub.
3. Lift the anti-skating weight over the anti-skating weight wire support.
The anti-skating weight should now be dangling in free space to the left
of support.
Slip the loop of the anti-skating weight's thread over the 3nd groove of the
stub to set the correct anti-skating force for the factory-fitted cartridge. Feed
the thread through the loop of the wire support.
rd (the correct anti-skating force for
10