Publicidad
Idiomas disponibles
Idiomas disponibles
Anti-skating force adjustment
The anti-skating force must be adjusted corresponding to the down force as
follows:
Down force
1 - 1.25g
1.25 - 1.5g
1.5 - 1.75g
1.75 - 2g
Slip the loop of the anti-skating weight's thread over the 3rd groove of the
stub to set the correct anti-skating force for the factory-fitted cartridge. Feed
the thread through the loop of the wire support.
Stereo System connection
RCA Jacks
·
The RCA Jacks of this unit are shared as both the Phone output
jacks and the Line output jacks. They are determined by the
Phono/Line Switch.
·
When used as a line output, the jacks output analog line-level
signals and could be connected directly with a pair of active
speakers or the appropriate input of your stereo system. When
used as a Phono output, they should be connected to the phono
pre-amplifier or the phono input of the stereo system.
·
The Red plug connects with the Right channel and the White
plug connects with the Left channel.
Note:
·
If the Phono/Line switch is set at LINE position but RCA jacks
connected to the stereo system's phono input, the sound might
Groove in the stub
1 st from bearing rings
2 nd " " "
3
rd
" " "
4 th " " "
11
Publicidad
