cecotec GRANDHEAT 2300 BUILT-IN BLACK Manual De Instrucciones página 55

ESPAÑOL
3. INSTALLATION
This device is a cabinet or built-in microwave; therefore, the following instructions must be
followed when installing it.
The device must be installed far from the TV, Radio or antenna as picture disturbance, or noise
may occur.
The appliance must be positioned so that the plug is accessible.
Install the feet with self-lock screws. Fig. 3.
Install the top air guide. Fig. 4.
Install the holder. Fig. 5.
Introduce the microwave in the cabinet and fix it with wood screws. Fig. 6.
Cabinet details:
Cavity: (L) 560 mm*(H) 443 mm*(D) 550 mm;
Intake: (L)≥272 mm*(W)≥72 mm
Exhaust port: (L) ≥560 mm*(W)≥50 mm
Net depth≥550 mm
Approx. plate thickness: 18 and 20 mm.
Secure the ornamental frame to the holders. Fig. 7.
Make sure all pieces are properly installed. Fig. 8.
Cabinet air flow chart
Fig. 9.
4. OPERATION
Plug the device to a power supply. The LED light indicator will flash 3 times and the display will
show ":". Enter the cooking menu and the cooking time.
Time/Weight/Auto cooking button
Use these 2 buttons to increase or decrease cooking time, weight or set the Auto cooking menu.
Pause/Cancel button
While configuring settings before operating the device or at the initial stage, press this button
once to cancel input programs and to return to the initial stage.
During the cooking process, press this button once to stop operation, or press twice to cancel
the cooking program.
GRANDHEAT 2300 BUILT-IN BLACK/WHITE 55