Beper 90.513 Manual De Instrucciones página 9

Milk frother Use instructions
Overview of controls
1 Lid
2 Mixer
2a "Froth" mixer
2b "Heat" mixer
3 Handle
4 Pitcher
5 Base
6 Heat frother/mixer button
7 Cold frother/mixer button
8 Power cord
Intended use
This appliance is for
• Heating and frothing milk.
• Preparing hot chocolate
• Heating sauces
It is intended and must be used for this purpose only.
It may only be used in the manner described in these operating instructions.
This appliance must not be used for commercial purposes.
Any other use is unauthorised and can lead to property damage or personal injury.
Beper is not liable for damages caused by unauthorised use.
Unpacking the appliance
• Remove the appliance from the packaging.
• Remove all packaging material such as plastic film, filling material and cardboard packaging.
• Check the package contents.
Note:
Dust or production scraps can still be present on the appliance. We recommend cleaning the ap-
pliance as described in "Cleaning".
Operation and instructions for use
Location
Place on a level, skid-proof surface.
Electrical connection
Connect the power cord to a correctly installed and grounded 230 V, 50 Hz socket.
Mixing attachments
On the underside of the console you will find two mixing attachments.
Attachment 2a is for frothing milk.
With attachment 2b you can heat various liquids.
Installing the mixing attachments
Choose an attachment and press the wave on the bottom of the pitcher.
Warning:
Prevent injuries! The wave is pointed so that the attachment fits.
Note:
The attachments come off more easily if you remove the pitcher from the console first.
9