Publicidad
FR
4.2 PREPARATION
USE WATER FROM THE MAINS OR FROM A TANK (SUBJECT TO AN ADDITIONAL
FILTER). COLD OR TEMPERATE WATER ONLY, NO HOT WATER.
ES
WARNING: THE APPLIANCE IS NOT DESIGNED FOR CONNECTING TO TAP
PT
WATER. USE A BACKFLOW PREVENTER IN ACCORDANCE WITH EN12729 TYPE
BA OR EN 61770 WITH A ONE-WAY VALVE .WATER THAT HAS FLOWN THROUGH
THE BACKFLOW PREVENTER IS CLASSIFIED AS UNDRINKABLE.
IT
NOTE: Regarding the information pertaining to the connection to the potable water mains,
length and quality of the water supply hose, thanks to refer to the assembly manual enclosed
EL
in the package.
Assemble your high pressure cleaner: illustration 2.1 to 2.4
PL
Assemble the two hooks to hold the gun and the nozzle, the two hooks for the hose and the
water supply adaptator.
Unwind the hose completely before using your appliance.
RU
Assemble the gun handle with 5 in 1 nozzle : push and turn to fix the nozzle into the gun.
Plug the garden hos: illustration 2.5 to 2.7
Connect the garden hose to a tap up to the high pressure cleaner.
KZ
Don't forget to place the water supply adaptator as shown on the high pressure cleaner before
connecting the hose.
4.3 FIRST USE
UA
RO
Pay particular attention using the machine for the first time: focus and dedicate all your
EN
attention to this first use. Make the first trial on a free space with no obstacle and no surrounding
element.
4.4 OPERATION
The electric supply connection shall be made by a qualified electrician and comply with IEC
60364-1. It is recommended that the electric supply to this machine should include either a
residual current device that will interrupt the supply if the leakage current to earth exceeds
30 mA for 30 ms or a device that will prove the earth circuit.
Wear eye, ear and head protection.
Wear protective gloves and safety boots.
WARNING ! READ THE « SAFETY INSTRUCTION » SECTION AT THE
BEGINNING OF THIS MANUAL INCLUDING ALL TEXT UNDER
SUBHEADING THEREIN BEFORE USING THIS PRODUCT.
200
Publicidad
