Publicidad
Idiomas disponibles
Idiomas disponibles
Maintenance
Removing the Drawer
Remove the drawer from the appliance to allow access to the mounting holes
during installation, and to reduce weight:
STEP 2:
Push locking
tab
STEP 3:
Pull front of
drawer
10 English
1.
Pull the drawer out to a fully open
position.
2.
Push on the locking tab on both sides
as you pull the drawer.
3.
For safety, push both drawer slides
into the drawer opening.
Re-installing the Drawer
1.
Push the rail until it reaches the end
of the chassis.
2.
Pull out the retainer to the front of
the rail.
3.
Slightly insert one side of the drawer's
rail into the chassis rail.
4.
Repeat the same process on the
opposite side.
5.
Gently open and close the drawer to
make sure that it is properly installed.
Publicidad
