Publicidad
Idiomas disponibles
Idiomas disponibles
APZ 1200
Cleaning and maintenance:
Open the dust container.
Take out the filters.
Empty the dust container.
Clean the filter by shaking out the ash. If the filters are very dirty you can wash
them with soap and water, before putting them back they must be completely
dry.
Mount the vacuum.
TOUBLESHOOTING
Problem
The motor does not start
Suction power is weaker
Unplug the appliance after use.
Possible reason
- The power cord is not properly
plugged into the power outlet.
- The socket is damaged.
- Faulty motor
- Clogged tube
- The HEPA filter needs cleaning
- The dust container is not in its
position.
- Full paper bag
Tip
- Connect the unit firmly.
- Check the socket or try another.
- Take the appliance to the technical
service
- Remove the blockage
- Clean the filter (previous section)
- Check that it is well placed and
fastened with the closures
- Place a new bag
14
Publicidad
