Publicidad
Idiomas disponibles
Idiomas disponibles
How To Stop
Emergency Stopping
Release the engine stop lever (A). See Figure 10.
Normal Stopping
Move the depth control lever (B) forward to raise the
blade. Then, release the engine stop lever (A) (see
Figure 10).
Figure 10: Operating Controls
How To Use The Depth Control
Lever
_,WARNING
• Keep a safe distance from rotating blade
during operation.
1 Start the engine.
2 To lower the cutting blade (C), pull the depth
control lever (B) back. To raise the cutting blade,
push the depth control lever forward (see
Figure 11).
3 Select the edging depth that you need.
NOTE: For deep edging, first cut at shallow
depths. Then, cut at greater depths until the
desired depth is obtained.
WARNING
• Operate equipment with guards in place.
• Keep hands and feet away from rotating parts.
• Tie up long hair and remove jewelry.
• Do not wear loose-fitting clothing, dangling
drawstrings or items that could become
caught.
• Never leave the unit unattended while the
engine is running.
• Keep bystanders away from machine.
B
c
Figure 11: Depth Control
14
Publicidad
