GE AEE08 Manual Del Propietario Y Instrucciones De Instalación página 11

Window Installation Instructions
[]
[]
[]
INSTALL THE AIR CONDITIONER
IN THE CASE
Slide the air conditioner into the case by
the base pan. Do not push on the controls,
styrofoam air discharge housing or the finned
coils. Make sure the air conditioner is firmly
seated.
/!!_:!
Do not press on
these areas i
damage to the
unit may result
Base Pan
Replace the 2 screws removed earlier, one
on each side of the case.
IMPORTANT: THE GROUND SCREWS MUST BE
REINSTALLED TO ENSURE PROPER GOUND.
19] INSTALL THE AIR CONDITIONER
IN THE CASE (CONT.)
['_ Attach the front grille to the case by inserting
the tabs on the grille into the slots on the
front top of the case. Push the grille in.
c _ ¢:::::3@ _
Secure the front grille to the case by
replacing the 2 screws removed earlier.
Press on the top of the grille to help with
side screw installation.
[_ Replace the two control knobs.
[-_ Connect power.
11