Descargar Imprimir esta página

Retekess TR112 Manual Del Usuario página 13

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 92
7.4: Method of storing a channel manually In the mode of reception, search the target
frequency using the methods in Article 7.3.2. Long press"[
the mode of channel storage, the address of storing a channel
appears on LCD and" PRESET **" flashes, now lightly press "[
choose an address of storing a channel and press"[
storing a channel is off, now manual channel storage is finished.
Note: if a target frequency is chosen, long press"[
and lightly press"[
according to the sequence of addresses.
7.5: Take a channel Store a channel using the methods in Article 7.3.2.3 and 7.4.
Lightly press"[
"[
] " or"[
taking a channel. Change a channel every time lightly press"[
"PRESET00-PRESET**" appears( "01-**"is the address of taking a channel).
Note:"PRESET--"means no channel stored.
7.6: WB:Lightly press"[
long press"[
] " or"[
Receiving frequencies:
1-162.400MHZ, 2-162.425MHZ, 3-162.450MHZ, 4-162.475MHZ,5-162.500MHZ, 6-
162.525MHZ,
7-162.550MHZ
Turn on the alarm: long press"[
state of" ALE", if no alarm signal is searched, long press"[
ALE".
(Note: after automatic alarm search, if no button works, long
press "[
]" again for 2 seconds to cancel the alarm first and then use other functions)
Turn off the alarm: after the alarm rings, lightly press"[
ALE".
7.7: Start SQ function at AIR
In the mode of AIR, long press"[
turn off SQ function " sq On": turn on SQ function Lightly press"[
two. What you choose will be the default one.
8: Introduction to Bluetooth mode
Bluetooth name of this product:"RETEKESS-TR112 ".
8.1. When radio is powered on, lightly press"[
Bluetooth symbol"[
successful connection, Bluetooth symbol"[
8.2. Lightly press"[
press"[
]" or push"[
"[
]" for 2 seconds to switch between pause and play, or operate the mobile to control
accordingly.
8.3. Disconnection of Bluetooth: in the mode of Bluetooth, long
press"[
] " to disconnect Bluetooth.
]" to confirm a channel is stored. Channels can be stored like this
] " to take a channel. When" PRESET **" is displayed, lightly press
] " or rotate the pulley on the right"[
]" to switch to WB. Lightly press"[
] " to choose a weather frequency.
] " for 2 seconds to enter automatic alarm" ALE". In the
] "," sq OFF" and" sq On" appear on LCD. " sq OFF":
] "flashes, which means it's waiting for connection to Bluetooth. After
] " or lightly push"[
] " anticlockwise to return to the previous song. Long press
] " again to confirm. The address of
] " for 2 seconds to store a channel
] " to choose an address of
] " again for 2 seconds to exit"
] " to turn off the alarm and exit"
] " to switch to"[
] " is always on.
] " clockwise to play the next song. Lightly
10
] " for 2 seconds to enter
] " or"[
] " to
] " or"[
] ",and
] " or lightly press and
] " to switch between the
] ".

Publicidad

loading