Publicidad
Idiomas disponibles
Idiomas disponibles
GARDEN HOSE INSTALLATION
4.
For the second hose clip - you will
complete the installation on the inside of
the hose reel. Place the clip around the
hose, with the flat side facing the reel.
Insert the M6 x 20 Screw from the outside
of the hose reel pointing in. Then secure in
the same fashion using the included 4 mm
hex key.
Complete hose installation by turning the
crank and using the alignment guide to
help load the hose in an even orientation.
Hardware Used
M6 x 20 Screw
4 mm Hex Key
OPERATION
1.
Turn water on and pull as much hose is needed out through the alignment guide and use
for watering.
2.
When done, wind hose back onto the reel using crank arm and alignment guide. Turn off water
and squeeze nozzle trigger to release remaining water from the hose. When done, wind hose
back onto the reel using crank arm and alignment guide.
STORAGE
1.
Make sure all water is drained from hose when not in use.
2.
Do not store in direct sunlight.
WARRANTY
LIMITED LIFETIME WARRANTY: This product is guaranteed to be free from defects in material and
workmanship. Instances of normal wear and tear, damage caused by abuse, misuse, alteration or
failure to follow instructions or proper maintenance protocols are not covered.
4
x 1
11
Printed in Cambodia
Publicidad
