Publicidad
Idiomas disponibles
Idiomas disponibles
ASSEMBLY INSTRUCTIONS
7.
Insert the Hitch Pin into the hole on the Axle
on the outside of the support arms. Attach
a Wheel (I) onto each end of the Axle (J).
Secure Wheels with Wheel Mounting Screw
and Wheel Caps.
Hardware Used
Wheel Mounting Screw
Wheel Caps
Hitch Pins
4 mm Hex Key
8.
Attach the Hose Alignment Assembly (E)
between the two Side Supports (F) and
secure each side with a self-tapping screw.
Hardware Used
Self-tapping Screws
2.5 mm Hex Key
9.
Remove elastic bands prior to installation.
Attach the Handle and Top Tray Assembly
(A) onto the Upper Aluminum Tubes (G) and
secure with eight Self-tapping Screws.
Hardware Used
Self-tapping Screws
2.5 mm Hex Key
NOTE - The handle will open slightly at the
seam to allow for ease of installation. This is
normal and will be remedied when the screws
are all placed.
7
x 2
x 2
x 2
8
x 2
9
x 8
8
F
E
A
G
I
J
F
G
Publicidad
