Kobalt 53293 Manual De Instrucciones página 9

ASSEMBLY INSTRUCTIONS
10. Mount the Crank Handle (K) by aligning to the
holes on the attachment point and tighten the
pre-loaded Crank Handle Set Screw.
Hardware Used
Crank Handle Set Screw
3 mm Hex Key
11. Screw the Valve Assembly into the
aluminum pipe thread of the Hose Reel
Assembly. Use an adjustable wrench to
tighten (not included).
Hardware Used
Valve Assembly
12. Attach leader hose to the Valve
Assembly. Tighten (L) with an adjustable
wrench (not included) if necessary.
Hardware Used
Adjustable Wrench (not included)
x 1
x 1
9
10
11
12
K
L