Use
Cleaning and heating up
Burns WARNING
− Do not touch the hot surfaces of the waffle maker.
− The device has no on/off switch. The device is supplied with power
and gets hot immediately after the power plug is connected to the
power outlet.
The device may give off a slight odour and smoke during first use. This
is harmless. Ensure there is sufficient ventilation e.g. through an open
window.
Before using the waffle iron for the first time, it is recommended to clean the device to
remove any production or packaging residues.
After cleaning, heat up the waffle iron without cooking anything in it and clean it again
after cooling down.
1. Clean the device as described in the "Cleaning" section.
2. Fully unwind the power cord.
3. Place the waffle iron on a flat, heat-resistant surface.
4. Connect the power plug to a properly installed and grounded power outlet and let
the waffle maker heat up for about 10 minutes.
5. Unplug the power cord from the mains outlet.
6. Leave the waffle iron to cool completely. After cooling, clean the device again as
described in the "Cleaning" section.
The waffle iron is now ready for use.
Use
Heating up the device
Risk of burns, scalds and fire
− Do not touch the hot surfaces of the device. Pay particular attention
when you open the hot housing cover and when the device is open.
− Do not leave the waffle iron unattended when it is heating up or still
cooling down or during operation.
During use, the indicator light goes on and off repeatedly and clicking
noises can be heard. This is normal and indicates that the device is always
heating up automatically.
1. Place the waffle iron on a flat, heat-resistant surface.
20
Mini waffle maker KG 2344 | KG 2345