Chauvet Professional MT-07 Guía De Referencia Rápida página 3

Operation
Before operating this product, read the
1. Identify which module to remove.
2. Place the MT-07 firmly and flat against the center of the module.
3. Press and hold the trigger.
4. Pull the MT-07 back until the module comes free from the connector.
5. Hold the trigger until the module is secure (hold the module with a hand or place it on a surface).
Battery Charge Notes
Rechargeable lithium-ion batteries are potentially hazardous and can present a serious FIRE HAZARD, SERIOUS
INJURY, and/or PROPERTY DAMAGE if damaged, defective, or improperly used.
• ALWAYS:
• Charge using a manufacturer-provided charger while the product is powered off.
• Charge the battery in temperatures between 32°–95°F (0°–35°C).
• Allow a depleted battery to charge for a few minutes before turning on the product. If the battery is
completely discharged, the device cannot be turned on immediately when the charger is connected.
• Keep at least 3 ft (1 m) distance to any heat source and away from flammable materials.
• Keep the lid of any charging case open while charging.
• Keep batteries away from children.
• Follow local regulations when disposing of batteries.
• Replace with a Dyson V6 battery or its equivalent.
• DO NOT:
• Continue charging if the battery becomes hot, smokes, swells, or gives off an odor during charging.
• Leave the product unattended while charging.
• Charge the battery in a closed container.
• Charge for more than 24 hours.
MT-07 QRG Rev. 1
QUICK REFERENCE GUIDE
Safety Notes.
EN
2