Fagor IO-CBI-1385 Manual De Instrucciones página 42

OPERATION
Semi–automatic operation
If the oven is to be switched off at a given time,
then you should:
lSet the oven function knob and the tempera-
ture regulator knob to the setting at which you
want the oven to operate.
lPress sensor
MENU
show:
lSet the required time using sensors > and
<, within a range from 1 minute to 10 hours.
The set time will be introduced to the memory
after approx. 7 seconds and the display will
show AUTO function.
When the set time has passed the oven is
switched off automatically, the alarm signal
is activated and the signal function AUTO
flashing again;
lSet the oven function knob and the tem-
perature regulator knob to the switched–off
position.
lPress sensor
MENU
off the signal; the signal function will go out
and the display will show the current time.
Caution!
In ovens equipped with one control knob,
the oven function knob is integrated with the
temperature regulator knob.
42
until the display will
, < or > in order to switch
Automatic operation
If the oven is to be switched on for a specified
period of time and switched off at a fixed hour
then you should set the operation time and the
operation end time:
lPress sensor
MENU
show:
lSet the required time using the sensors >
and < within a range from 1 minute to 10 hours.
lPress sensor
MENU
show:
lSet the switch–off time (operation end time)
using sensors > and <, which is limited to a
period of 23 hours and 59 minutes from the
current time.
lSet the oven function knob and the tempera-
ture regulator knob to the setting at which you
want the oven to operate.
until the display will
until the display will