Publicidad
Idiomas disponibles
Idiomas disponibles
EN
OPERATING MODES
1. Normal Mode
It is automatically activated by default when the steam iron is switched on. The "PROGRAM" button (3)
remains off.
It allows to obtain the best result on thick and very creased garments.
2. "Healthy" mode for energy saving *.
If the "Healthy" program is activated, it provides a special combination of temperature and steam
application intervals to obtain a hygienic effect without using chemical additives. It can be used on all
types of fabrics and is extremely efficient on both thick and delicate fabrics. The water and energy
consumption of the appliance is reduced, and a good ironing result can still be obtained for most
garments.
Press and hold down the "PROGRAM" button (3). The indicator lamp on the push button will illuminate
and remain lit.
To return to normal mode, press the "PROGRAM" button again. Normal mode is recommended for best
results on thick and heavily wrinkled garments.
Tips for efficient use:
Place the iron on the garment or fabric you want to disinfect, or vertically in front of the garment keeping
a certain distance.
Press the steam release button continuously. Powerful blows of hygienic steam will be emitted. Slowly
slide the iron over the garment or up and down vertically for best results.
-
3. "Boost" mode for maximum power*.
For garments that need more powerful steam, you can activate the "Boost" mode to obtain the
maximum steam quantity.
Press and hold down the button "PROGRAM" (3) for 5 seconds. The indicator light on the push button
shall illuminate and flash continuously.
To switch back to the normal energy setting, press the "PROGRAM" button again.
Auto switch off *
For your safety and to save energy, the appliance switches off automatically when it has not been used
for 8 minutes.
Three beeps will be heard, and all indicator lights (1, 2, 3) will flash.
To switch the steam station back on, press the steam release button (14) again.
* available depending on the model
20
Publicidad
