cecotec CONGA ASH 5000 EASYGO Manual De Instrucciones página 43

3. OPERATION
Fig. 3
1. Before switching on the appliance, make sure that the high-efficiency filter is properly
installed.
2. Set the wheels of the ash vacuum cleaner and the flexible hose.
3. Set the desired accessories depending on the cleaning to be carried out.
4. Plug in the product and press the power button.
5. If the suction power decreases, you can improve it by pressing the cleaning button.
6. You can use the blowing function by mounting the flexible hose in the marked hole. To
start the blowing function, press the power button.
7. Always unplug the appliance after each use.
4. CLEANING AND MAINTENANCE
Fig. 4
1. Open the dust tank.
2. Remove the high-efficiency filter.
3. Shake the dust out of the high-efficiency filter to clean it.
4. Empty the dust tank.
5. Wash the high-efficiency filter with clean water if necessary.
6. Please note: before reinstallation, be sure to dry the high efficiency filter completely if it
has been previously washed with water.
7. Put the filter and tank back in place inside the vacuum cleaner.
WARNING
The surface of the device may only be cleaned with a dry or damp cloth.
ENGLISH
Conga Ash 5000 EasyGo
43