Publicidad
Idiomas disponibles
Idiomas disponibles
STEP 1 BIS : Structure assembly : Installation on the wall
The solar kit can be mounted vertically on the wall. The 5 first steps are the
same as for Installation on the ground, please refer to STEP 1 part.
To help you prepare the place where it can be placed, You can use the 1 :1
drawing provided.
The micro inverter must be located at a maximum distance of 20m from your
Wifi router, and with a maximum of one wall.
Position the
pattern using the
paper, provided in the
box. They should be all
aligned on your wall.
Mark the locations
of
the
screws with a pencil
and remove the papers.
Check that the
future
hole pattern is
correct by placing the pre-
assembled kit on top of
your wall. You should see
the pencil mark through
the holes for wall mount.
Publicidad
