topmark REESE Instrucciones De Uso página 13

ASSEMBLING
FRONT WHEEL ASSEMBLY
Hold one front leg, push the whole front wheel set into the upper wheel block until
you hear a click (1). Repeat on the other side.
Press the button on top of the upper wheel block to release the front wheel (2).
EN
1 2
FITTING CANOPY
Keep the canopy closed and adjust the Velcro tight around the plastic end part (see
fig. 1). Put canopy hoop front into position and fold out the canopy. Then also buckle
the Velcro on both handle tubes on both sides of the canopy (see fig. 2).
2
1
Then attach the Velcro on the
underside of the canopy to the
backside of the inlay (see fig. 3).
3
13