Annovi Reverberi HPJ 8.12 REG EM Manual De Uso E Instalación página 27

Purpose of the manual
The manufacturer has provided this manual to provide
the operating instructions and the criteria to be complied
with when installing, using and maintaining the electric
pump with the brand name and model reported on the
cover.
The manufacturer may supply the original instructions in
other languages in response to statutory or commercial
requirements.
If the electric pump is sold, the seller must pass this
manual on to the new owner along with the pump.
The instructions are intended for skilled, suitably trained
operators who carry out the installation and routine
maintenance.
Refer to the table of contents for rapid access to the
topics covered.
The manufacturer reserves the right to amend the
manual without notice, unless the amendments refer to
the pump's level of safety.
The owner must ensure that the installation is designed
in accordance with the instructions in this manual,
statutory requirements, and the relevant national and
local regulations
The technical instructions in this "Use and Installation
Manual" are the property of the manufacturer and must
be treated as confidential.
There may be differences between the illustrations
and the pump's actual configuration, but any such
differences will not affect the clarity of the instructions.
If in doubt, request the necessary explanations from the
manufacturer.
This manual must be kept throughout the working life
of the electric pump in a well-known place that is easily
accessible to the operators who may need to consult it.
Manufacturer's name and address and electric pump identification
Data plate
The data plate shown here, containing essential
information for safe operation, is affixed to every electric
pump.
D
E
UN20-4306-GM
English
GENERAL INFORMATION
S
B
C Q R
M
P
N
L
F
G
H
A
If the manual is lost, crumpled or is no longer legible, ask
the manufacturer for a replacement copy and specify the
model and the serial number of the electric pump.
The symbols shown and described below are used to
identify safety risks or important information.
DANGER
Indicates information or procedures that could result
in death or serious personal injury if not strictly
performed.
WARNING
Indicates information or procedures that could result
in death or serious personal injury if not respected.
CAUTION
Indicates information or procedures that could result
in mild personal injury if not respected.
NOTICE
Indicates important information or procedures to
follow to avoid abnormal operation or damaging the
materials.
A) Manufacturer's name and address
B) Electric pump model
C) Serial number
D) Rated flow rate (l/min)
E) Rated pressure (bar- MPa)
F) Maximum pressure (bar - MPa)
G) Motor power rating (kW)
H) Maximum current (A)
L) Maximum intake liquid temperature (°C)
M) Electrical protection level
N) Connection voltage (V) - no. phases
P) Rated frequency (Hz)
Q) Year of manufacture
R) Lubricant specifications
S) QR code
27
1
Use and Installation