Publicidad
Idiomas disponibles
Idiomas disponibles
1. Control panel
2. LED display
3. Fan body
4. Thumb screw (on the back of the fan)
5. Fan base
6. Speed buttons
7. Timer button
8. on/off button
9. Oscillation button (swinging motion)
10. Fan mode button
11. LED display (Close-up)
12. The timer's LED status
13. Normal mode (LED status)
14. Sleep mode (LED status)
15. Natural mode (LED status)
16. Quiet mode (LED status)
17 and 18. Fan speed buttons
19. Fan mode button
20. On/off button
21. Timer button
22. Oscillation button (swinging motion)
20
Assembly
1. Mount the fan base to the fan body. Make sure
the hole between base and body are aligning.
2. Seen from underneath the fan: Rotate the
knobs about 90°.
Use
During usage, the LED display automatically turns
off after 30 seconds.
Control the fan either from the control panel or the
remote control.
1. Press the on/off button to power on or off.
2. Press the speed buttons to increase or
decrease the fan speed by 1. Speed settings are
1-12.
Current speed will be displayed on the LED
display.
Note: Changing fan speed only works in "normal"
fan mode.
3. To turn off automatically. To set the timer,
press the timer button.
Timer settings are: 0.5, 1, 1.5, 2, 2.5, 3, 3.5, 4,
4.5, 5, 5.5, 6, 6.5, 7, 7.5, 8, 8.5, 9, 9.5, 10, 11, 12
hours. Set time will be displayed on the LED
display. When the timer runs out the fan will
automatically turn off.
4. To turn on automatically. To set the timer,
press the timer button.
Timer settings are: 0.5, 1, 1.5, 2, 2.5, 3, 3.5, 4,
4.5, 5, 5.5, 6, 6.5, 7, 7.5, 8, 8.5, 9, 9.5, 10, 11, 12
A N O R D I C B R A N D
Publicidad
