Ezviz C3W Guia De Inicio Rapido página 10

- Scan the QR code on the body of the camera.
- Follow the EZVIZ app wizard to finish Wi-Fi configuration.
You can also select wired connection.
Step 1: connect the camera to the router with a network cable.
Step 2: add the camera to EZVIZ app by scanning its QR code.
• Hold the RESET button for 5 seconds when camera is running if either adding cameras or
Wi-Fi connection fails.
• If your product is 2.4GHz only, we kindly recommend you switch off router's 5GHz first to
proceed adding process.
N3
Network Cable
2