Descargar Imprimir esta página

GE Monogram ZEM115 Manual Del Propietário página 27

Publicidad

Idiomas disponibles

Idiomas disponibles

Care and Cleaning
Countertop
Microwave
Oven
Helpful Hints
An occasional thorough wiping with a solution of baking soda and water
keeps the inside fresh.
Unplug the cord before cleaning any part of this oven.
How to Clean
the Inside
Walls, Floor, Inside Window, Metal and Plastic Parts on the Door
Some spatters can be removed with a paper towel; others may require a
damp cloth. Remove greasy spatters with a sudsy cloth, then rinsewith a
damp cloth. Do not use abrasive cleaners or sharp utensils on oven walls.
To clean the surface of the door and the surface of the oven that come
together upon closing, use only mild, nonabrasive soaps or detergents using
a sponge or soft cloth. Rinse with a damp cloth and dry.
Never use a commercial oven cleaner on any part of your microwave.
Removable Turntable and Turntable Support
To prevent breakage, do not place the turntable into water just after
cooking. Wash it carefully in warm, sudsy water or in the dishwasher.
The turntable and support can be broken if dropped. Remember, do not
operate the oven without the turntable and support in place.
How to Clean
the Outside
Do not use cleaners containing ammonia or alcohol
on the microwave oven. Ammonia or alcohol can
damage the appearance of the microwave.
Case
Clean the outside of the microwave with a sudsy
cloth. Rinsewith a damp cloth and then dry. Wipe
the window clean with a damp cloth.
Control Panel and Door
Wipe with a damp cloth. Dry thoroughly. Do not use
cleaning sprays, large amounts of soap and water,
abrasives or sharp objects on the panel-they can
damage it. Some paper towels can also scratch the
control panel.
Door Surface
It is important to keep the area clean where the door
seals against the microwave. Use only mild, non-
abrasive detergents applied with a clean sponge or
soft cloth. Rinsewell.
Power Cord
If the cord becomes soiled, unplug and wash with a
damp cloth. For stubborn spots, sudsy water may be
used, but be certain to rinse with a damp cloth and
dry thoroughly before plugging cord into outlet.
r
_z
Stainless Steel (onsome models)
Do not use a steel-wood pad; it will scratch the
surface.
To clean the stainless steel surface, use a hot, damp
cloth with a mild detergent suitable for stainless steel
surfaces. Usea clean, hot, damp cloth to remove
soap. Dry with a dry, clean cloth. Always scrub lightly
in the direction of the grain.
27

Publicidad

loading