Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATION
HOW TO SET THE PARKING
BRAKE
1.
2.
3.
4.
Completely push the clutch/brake
pedal forward.
Lift the parking brake lever (Figure 8).
Remove your foot from the clutch/brake pedal and then release
the parking brake lever. Make sure the parking brake will hold
the unit.
To release the parking brake, completely
push the clutch/
brake pedal forward. The parking brake will automatically re-
lease.
WARNING:
Before you leave the operator's position,
move the shift lever to the neutral (N) position. Set the
parking brake. Move the blade rotation control to the
DISENGAGE
position. Stop the engine and remove
the ignition key.
Clutch/Brake
Pedal
Parking Brake
Figure 8
HOW TO CHANGE
THE CUTTING
HEIGHT
To change the cutting height, raise or lower the lift lever as follows.
1.
Move the lift lever forward to lower the mower housing and
back to raise the mower housing (Figure 9).
2.
When you ride on a sidewalk or road, move the lift lever to the
highest position and move the blade rotation control to the
DISENGAGE
position.
HOW TO STOP THE UNIT
1.
Completely push the clutch/brake
pedal forward to stop the
unit. Keep your foot on the pedal.
2.
Move the blade rotation control to the DISENGAGE
position.
3.
Move the shift lever to the NEUTRAL position.
4.
Set the parking brake.
Figure 9
_
ARNING: Make sure the parking brake will hold the
unit.
5.
Move the throttle
control
to the SLOW
position.
6.
To stop the engine, turn the ignition key to the OFF position.
Re-
move the key.
HOW TO TRANSPORT
THE UNIT
To transport
the unit, follow the steps
below.
3.
1.
Move the blade
rotation
control
to the DISENGAGE
position.
2.
Raise the lift lever to the highest
position.
4.
F-040607L
13
Move
the throttle
control
to a position
between
SLOW
and
FAST.
To go faster,
move the shift lever to a faster
speed.
Publicidad
