GE GFWS1705 Manual Del Propietario E Instalación página 8

Control settings.
Stain Removal Guide
(on some models)
The Stain Removal Guide is pre-
programmed with the ideal wash and
rinse settings to tackle five common
stains: grass, wine, blood, tomato and
dirt. To use this feature, select the
desired wash cycle and then press
the Stain Removal Guide button
until the stain you want to remove is
highlighted. Once selected, press the
Start button to start the cycle.
For some stains, a prewash will be
selected automatically. Be sure to
add liquid or powder high-efficiency
detergent, or the proper wash additive
to the prewash dispenser.
Add Steam cannot be selected when
the Stain Removal Guide is used.
PreSoak
PreSoak (on some models)
For soaking your garments prior to
the PreWash (if selected) and/or wash
cycle. This option begins with a brief
tumble and then proceeds to soak the
clothes with cold water for a specified
period of time. Once complete, the
cycle will begin automatically.
PreSoak must be selected prior to
pressing Start.
The PreSoak time is set in 1/2hour
increments, with the maximum
presoak set option of 8 hours.
If desired, add high-efficiency detergent
or the proper wash additive to the
prewash dispenser.
Ext Tumble
Extended Tumble (on some models)
Freshly tumbles your garments
periodically for up to 8 hours after the
wash cycle is complete to lessen the
setting of wrinkles and creases when
you are not able to move clothing to
the dryer right away.
At the end of the cycle, the display will
scroll "END" and after ten minutes the
Extended Tumble will begin. It can be
stopped at any time by pressing the
Power button.
Note: The Extended Tumble option
cannot be added to the My Cycle
feature.
(
Volume
Volume
This button has two functions:
[] To change the loudness of the end of
cycle signal, press the button as many
times as needed to reach the desired
volume. There are four sound levels
including OFF.
[] To turn the button sounds ON/OFF,
press and hold the button for 3
seconds.