TP-Link EAP230-Wall Guía De Instalación Rápida página 12

English
junction box, use the screws attached to the junction box instead.
• For some models, switch the order of Step 3 and Step 4.
5. Press the faceplate of the AP back into position.
Software Configuration
To quickly set up a wireless network connection with mass APs,
please follow the steps below.
1. Get the Controller from https://www.tp-link.com or contact
the sales staff.
2. Launch the Controller and follow the configuration wizard to
create a primary wireless network.
3. Adopt the AP devices in the Controller management interface
to change their status from Pending to Connected.
10