Maytag MD-33 Guia Del Usuario página 5

Step
Control features vary by model.
Select Cycle
To select a cycle, push in and rotate the control dial to
the desired setting. When using an IntelliDry cycle, the
control dial should point to "Normal Dry" for most
loads.
Loads of larger or bulkier size may require the "More
Dry" setting to completely dry the load. The "Less
Dry" setting is best suited for lightweight fabrics or for
leaving some moisture in the clothing at the end of the
cycle.
Permanent Press IntelliDry
The Permanent Press IntelliDry cycle
is designed to dry wrinkle free cottons,
synthetic fabrics, double knits and
permanent press fabrics automatically.
It minimizes wrinkling by providing
an unheated cool-down period at the
end of the cycle, extended
tumble
COO[Down ....
LessDry
More Dry
Off
Regular IntelliDry
The Regular IntelliDry cycle is
designed to dry loads such as towels,
underwear, t-shirts, jeans, etc.
Regular
IntelliDry
Norma[ Dry
Less Dry
Time Dry/Air Fluff
This cycle can be used to regulate
the drying time. Use with Air
Fluff, Extra Low (select models),
Delicate, Medium or Regular tem-
perature settings. For timed dry-
ing, turn the control dial until the
pointer points to the proper time
setting in the Time Dry/Air Fluff
cycle.
(:: Off
Drying Rack
NOTE, UshTg the Air Fluff tem:
perature setting will require a
longer drying time.
Time Dry/
Air Fluff
Pu[[ and Hold to Start oPush to Stop
Special Options
Damp Dry is located on the Time Dry/Air Fluff section
of the dial. It is designed to partially dry items and can
be used with any temperature selection. Damp Dry
will provide 20 minutes of tumbling time, followed by
5 minutes of cool-down tumbling.
Wrinkle Release will release wrinkles from items that are
clean and dry but only slightly wrinkled, such as from a
crowded closet or suitcase, or from sitting in the dryer
too long after the cycle has ended. Wrinkle Release pro-
vides 10 minutes of tumbling followed by five minutes
of cool-down tumbling and can be used with any tem-
perature selection.
4