Tecfrigo GROTTA 600 5TV Instalación Uso Y Mantenimiento página 10

REGOLAZIONE E PULIZIA
CONTENTS
Packing:
1. Unpacking instructions.
Fitting of the accessories:
2. The handles.
3. Laddered surface.
Cleaning:
4. Internal cleaning.
5. External cleaning.
Connections and control:
6. Connection to the mains.
WARNINGS
It is most important that this instruction booklet is kept together with the appliance both for future reference and for
reasons of safety. 1. Adults should operate this appliance only. Do not allow children to use the controls or play with it.
2. It is forbidden to modify in any way the main functions and characteristics of this appliance. 3. The electrical installation of
the appliance should be carried out by a qualified electrician or other competent person. 4. Never attempt to carry out repairs
unassisted. Inexpert repairs can cause serious damage and malfunction.5. Assistance has to be provided by an authorized
engineer only. Always use original spare parts.6. This appliance is not suitable for the storage of basic commodities not
including food-stuffs.7. The manufacturers of this appliance accept no responsibility for the consequences of misuse in
contravention of these safety instructions. It further reserves the right to carry out improvements without prior notice.8. Avoid
installing the cabinet directly in line with sunlight. 9. Nevere install the appliance near sources of heat, such as radiators,
stoves, etc.10. Keep the ventilation grills free from obstruction for at least 30 cm. 11.Ensure that the products displayed on the
shelves and grills do not hang over the edges. 12. If damp air or products to be refrigerated should cause ice to form on the
evaporator, we recommend stopping the compressor and placing the goods in special refrigerated containers, kept at the same
temperature, until defrosting is completed;if this is not carried out the compressor will continue to operate leading to a
wasteful consumption of electricity and poor performance.13. If the appliance is not working and unused, it is indispensable
to keep the door open at least 10 cm.
1. UNPACKING INSTRUCTIONS
CARDBOARD PACKAGING 1a. Cut the strap and lift up the cardboard packing.
WOODEN CRATE 1b. Remove the nails from the wooden crate with care. 2. Insert forks of fork-lift truck between
appliance and pallet or crate. 3. Lift the appliance. 4. Remove the pallet or crate. 5. Place the appliance on a horizontal level
surface, using the feet to adjust. 6. Insert the two spacers in the holes on the back of the appliance. 7. Make sure there is
nothing left inside the packaging before disposal. 8. Separate the different packaging materials to facilitate disposal.
(See picture 1)
2. THE HANDLES
1. The handles are in a package inside the appliance. 2. Fasten the handle base with the two screws already inserted in the
holes onto the jamb of the door. Tighten them. 3. Apply the plastic piece, pressing it until it clicks. (See picture 2)
3. LADDERED SURFACE
1. The stainless steel bars and the bottle support surface are inside the appliance. 2. The bar support guides are fixed to the
sides inside the appliance. 3. Each vertical guide has notches to allow the bars to be fitted in different positions. 4. Insert a bar
into the vertical side in order to support bottles on a sloped plane. 5. Place the laddered surface on the "L" brackets which are
on the sides inside the appliance. (See picture 3)
4. INTERNAL CLEANING
1. Clean the internal elements and the glass only with a soft sponge and neutral detergents. 2. Clean the transparent protection
tubes of the fluorescent lamps. Do not use detergents containing alcohol or other solvents which could damage the tubes. Use
only a soft damp cloth. 3. Dry with a soft cloth.
5. EXTERNAL CLEANING
1. To clean use the same products used for the inside. 2. To clean the wooden surfaces, use specific cleaning products
generally available on the market, which should anyway be water-based emulsions, free of all solvents. 3. Dry with a soft
cloth.
7. Control.
8. Checking the correct functioning.
Regular maintenance:
9. Cleaning of the condenser.
10. Internal cleaning.
Occasional maintenance:
11. Replacement of the internal lamps.
12. Replacing the magnetic strip on the door.
Diagrams:
Wiring diagram.
Diagram of refrigeration unit.
10
GB