Urmet 1092/252H Manual De Uso página 14

Opzione
IRIS
WB
WDR
AGC
2D-NR
BRIGHT
CONTRAST
SATURATION
SHARPNESS
RESET
SAVE-EXIT
WB
ATW
Auto Tracking White Balance mode allows an automatic adjustment based on surrounding environment
detection.
TRACK0/1/2/3
Surrounding environment detection (outdoor or indoor) in 4 different configurations, to be chosen according
to the image result.
WDR
WDR (Wide Dynamic Range) function allows to dynamically balance dark and bright camera images. When
in the image there are two zones, one very bright and the other very dark, in the camera field the WDR
allows to acquire and display bright and dark zones, in order to avoid overexposed or underexposed details
in both the zones.
14
Valore
AUTO
ATW  FULL  HOLD 
TRACK0/1/2/3
ON  OFF
00  31
00  05
00  31
00  31
00  31
00  31
/
/
Spiegazione
This function is used to select white balancing
mode.
WDR (Wide Dynamic Range) function allows to
dynamically balance the dark and bright areas of
the image shot by the camera (see below)
Automatic Gain Control - Questa funzione
interviene quando la telecamera si trova in
condizioni di scarsa luminosità.
This function (Dynamic Noise Reduction) allows
to digitally reduce image noise, especially visible
in absence of light.
It allows to adjust image brightness
It allows to adjust image contrast
It allows to adjust image saturation
It allows to change image sharpness
Maintaining pressed the joystick to right the
camera is reset to factory values
To exit the OSD menu and save the modified
parameters press the button to right
DS1092-223