RAV KT100 Manual De Servicio página 30

30
1.6 Source of Danger
Where?
Mechanic
What?
Danger!
Where?
Hydraulic What?
Danger!
Where?
Foot Pump
What?
Danger!
Where?
Current
What?
Danger!
Work on the electrical and
hydrau-lic components should
only be carried out by a com-
petent tradesman!
Danger
Never
• remove
• alter
• take out of service the safety
facil-ities
Always secure that the machine
is out of service when
• Setting up
• The alteration of the em-
ployment requirements
KT100_KT100XT_(0970M00100)_R1_UN_00
1.7 Qualified Operators
Scissors arms /
The operator must
underframe
• be over 18 years old
Crush and shear
• be instructed in the operation of the
points
machine
Loss of limbs /life
• have proved to the firm that he is ca-
Hydraulic
pable of operating the machine
components e.g.
hoses
• have read and understood the oper-
Because of
ating instructions
damage oil could
• must observe the operating instruc-
be sprayed out
tions
under high
pressure
Burns and
1.8 Personal Safety Equipment
contamination to
the eyes
For the operating of the machine:
Operating pedals,
Lifting / Lowering
• Safety shoes
Slipping off pedal
Injury to the leg
For cleaning / maintenance / repair:
Current carrying
• Safety shoes
components
• Work gloves
Touch
Life threatening • Face protection
1.9 Safety Measures in the Work
• Secure positioning of the machine
• Avoid crush and shear zones be-tween
the machine and it's surround-ings
• Ensure that the workplace remains cle-
an and clear of obstacles
1.10 Conduct In An Emergency
Footpump
Release the pump /
lower pedal
immediately
Secure against further
By raised load support the load carrying
component
Place
E - Hydraulic
Release the raise /
lower push-button
immediately
Switch of at the mains /
remove the plug