Brew Monk B40 Manual Del Usuario página 22

EN – Brew Monk User Manual
2.3.2 Filling the malt pipe with malt
Step 1
Insert the assembled overflow pipe (6) with the malt screen into the malt pipe (9).
Step 2
Extend the overflow pipe (6) to its maximum length.
Step 3
Insert the malt pipe (9) into the Brew Monk (1).
Fill it with water according to the recipe.
Step 4
Put the transparent cap on (13) and add malt to the
malt pipe (9).
Next, remove the transparent cap (13).
Step 5
Adjust the height of the extendable overflow pipe (6) so that it lies 3 to 4 cm above the water
level.
Step 6
Slide the top malt screen onto the malt using the handles.
3. Commissioning and connection
3.1 How do I get started with my
Brew Monk B40/B50/B70?
1. Plug the Brew Monk into a power socket.
2. Press the Power On button on the side of the
appliance. The screen will light up.
3. The kettle will now ask to be connected to the
Wi-Fi. We strongly recommend connecting the
kettle straight away. This will mean you always have
access to the latest, free software update and you
always have the most comprehensive version to
hand.
4. Once you have connected the kettle to the Wi-Fi (or
if you have pressed Skip), you will be taken to the
main menu.
22