Kenmore 116.33912 Manual Del Propietário página 19

Electrical Shock Or Personal Injury
Hazard
Disconnect electrical supply before
servicing or cleaning the unit.
Failure to do so could result in elec-
trical shock or personal injury from
cleaner suddenly starting.
TO REMOVE LIGHT BULB
Disconnect power cord from electrical out-
let. Lower handle to lay vacuum flat.
Screwdriver _/_-_ "_
Pry out light
lens at
slots.
Do not use a bulb rated over 9W
(13V). During extended use, heat
from the bulb could overheat sur-
rounding plastic parts.
Remove the light
bulb by pulling
straight out.
To replace the
light bulb care-
fully insert
securely into
slot. Replace
lens cover.
Replace light
lens using a
flat
screwdriver to
press the lens
tabs into
place.
Note: See PARTS AND FEATURES for
bulb number.
Y. . CAUTION
Do not plug in or turn on until the
vacuum is completely reassem-
bled.
19