Kenmore 116.33912 Manual Del Propietário página 6

EXTENSION HOSE ASSEMBLY
Connect extension hose to the valve
assembly by aligning "J" slot with raised tab
on valve assembly. Push downward and
rotate clockwise to lock in place.
Place the crevice tool in the rectangular
slot on back of wand holder.
Connect extension hose to telescopic wand
by aligning "J" slot with raised tab on wand.
Push hose downward and rotate clockwise
to lock in place.
Once extension hose is connected to the
telescopic wand, place the wand in the tele-
scopic wand location as shown.
For use of telescopic wand and extension
hose see ATTACHMENTS section on page 9
\,
Remove the Handi-Mate Jr. ® from the
plastic bag and insert Handi-Mate Jr. ® into
thevacuum cleaner as shown, then close
the Handi-Mate Jr. ® storage cover.
Extension _
Hose Wand
Slot
Valve
Assembly
Telescopic Wand
ion
Handi-Mate Jr.®
Handi-Mate Jr.®
Storage Cover
6