Kenmore 116.33912 Manual Del Propietário página 20

Electrical Shock Or Personal Injury
Hazard
Disconnect electrical supply before
servicing or cleaning the unit. Failure
to do so could result in electrical
shock or personal injury from clean-
er or agitator suddenly starting.
To clean agitator turn vacuum over, cut off
any carpet pile and lint entangled around
agitator with a pair of scissors in the slots
provided. Remove hair, string, lint and
other debris from the agitator.
The valve assembly will be closed when
the cleaner is in the upright position.
When you release the handle for normal
operation the valve opens to allow air to
pass for normal deep cleaning. This valve
will sometimes become dirty and may
need routine cleaning.
To clean the valve you must first remove
the deep cleaning n'ezzle hose to gain
access to the valve. Once the hose is
removed, wipe the surface of the valve.
Release the handle (see Handle Release
section, page 8) and lay cleaner back.
With the cleaner in the back position the
the valve is open. Wipe the inside with a
soft cloth to remove any dirt or residue.
Return cleaner to the upright position. Re-
attach nozzle hose and extension hose.
DeepC_lea_ing I I III II
Nozzle Hose _ _ I _
•,L_.:_._-..._ _ _) Valve
F/ Lift Here
Valve
Opening
20