Costway GT3665DE Manual Del Usuario página 26

Checking the tensioning of the saw chain
WARNING
Risk of injury!
A new saw chain must be retensioned after a maximum
of five cuts. This is normal during the run-in time: the
intervals between subsequent tensionings will get
larger.
The saw chain is tensioned correctly if it lies close against the
underside of the saw rail and can be moved easily by hand.
Readjust tension of the saw chain when necessary (
the saw chain ). If there is sufficient chain greasing, the oil spraying
off of the saw chain will form a slight trail.
Checking the chain greasing
NOTICE!
Device damage!
The device may not be used without sufficient chain
greasing. Insufficient greasing reduces the service life
of the device.
● Check the oil quantity in the tank.
● Start the device.
● Hold the running saw chain approx.
15cm ( 5.9 inches) over a suitable surface for a time (15s).
26
Re-tensioning